Differences

This shows you the differences between two versions of the page.

--- devices:srxe:handheld:pinouts [2023/05/29 12:11] – jkent
+++ devices:srxe:handheld:pinouts [2023/05/29 12:18] (current) – jkent
@@ Line 3: / Line 3: @@
 [[https://pastebin.com/raw/uFfBCQDG|Original]]
--------------------------------------------------------
+===== Test Points =====
-**Test Points**
 TCK top left if oriented with SW1 on top of board
@@ Line 31: / Line 30: @@
   CLK0 - ATmega128RFA1 pin 53 [PE7:ICP3:INT7:CLKO], R29 to Display pin 6
--------------------------------------------------------
+===== ISP Pads =====
-**ISP Pads**
 Pin 1 top left if oriented with SW1 on top of board
@@ Line 50: / Line 47: @@
   - GND
--------------------------------------------------------
+===== JTAG Pads =====
-**JTAG Pads**
 Pin 1 bottom left if oriented with SW1 on top of board
@@ Line 72: / Line 67: @@
   - GND
--------------------------------------------------------
+===== RS232 pads =====
-**RS232 pads**
 Pin 1 top left if oriented with SW1 on top of board
@@ Line 91: / Line 84: @@
   - GND, RS232 pad 5
--------------------------------------------------------
+===== Keyboard =====
-**Keyboard**
 Logical Layout (SK# are screen keys: top to bottom 1-5 on left, 6-10 on right):
@@ Line 123: / Line 114: @@
   ROW10 - ATmega128RFA1 pin 29 [PD4:ICP1]
--------------------------------------------------------
+===== Display =====
-**Display** (P3) marked "S028HN118A VER:A1" reportedly an ST7586S display chip driving a 384x160 LCD display
+(P3) marked "S028HN118A VER:A1" reportedly an ST7586S display chip driving a 384x160 LCD display
 Pin 1 on right if oriented with SW1 on top of board
@@ Line 146: / Line 137: @@
   - C28 to C23 to Vin (6V)
--------------------------------------------------------
+===== SW1 =====
-**SW1** (Power Switch), Normally Open
+(Power Switch), Normally Open
 Left and Right if oriented with SW1 on top of board
@@ Line 155: / Line 146: @@
   R - ATmega128RFA1 pin 27 [PD2:RXD1:INT2], Z1 pin 1
--------------------------------------------------------
+===== Speaker =====
-**Speaker** (unpopulated)
+(unpopulated)
 Pin 1 top if oriented with SW1 on top of board)
@@ Line 166: / Line 157: @@
   - Speaker pin 3, D1 (unpopulated) pin 3 (D1 pin 1 to GND)
--------------------------------------------------------
+===== U1 - RF Switch =====
-**U1** (Marked "G4J") possible high-frequency (RF) SPDT switch uPG2214TB
+(Marked "G4J") possible high-frequency (RF) SPDT switch uPG2214TB
 Pin 1 top right if oriented with SW1 on top of board
@@ Line 179: / Line 170: @@
   - ATmega pin 1, unlabeled capacitor to GND
--------------------------------------------------------
+===== U2 - SPI Flash =====
-**U2** (Marked "ATMLH028 Z7H1164A") possible Two-Wire Serial EEPROM Atmel AT24C?
+(Marked "ATMLH028 Z7H1164A") possible Two-Wire Serial EEPROM Atmel AT24C?
 Pin 1 top right if oriented with SW1 on top of board
@@ Line 194: / Line 185: @@
   - VCC (3.3V)
--------------------------------------------------------
+===== U3 - ATmega128RFA1 =====
-**U3** ATmega128RFA1
 Pin 1 top right if oriented with SW1 on top of board
@@ Line 265: / Line 254: @@
   - [PF1:ADC1] - Keyboard ROW2
--------------------------------------------------------
+===== U4 - DC-DC converter =====
-**U4** (Marked "PHNI") 5-pin package, possible TPS62203DBV 3.3V DC-DC converter
+(Marked "PHNI") 5-pin package, possible TPS62203DBV 3.3V DC-DC converter
 Pin 1 bottom left if oriented with SW1 on top of board
@@ Line 282: / Line 271: @@
   - VCC (3.3V)
--------------------------------------------------------
+===== U5 =====
-**U5** 10-pin package outline
+-pin package outline
 Pin 1 top left if oriented with SW1 on top of board
@@ Line 299: / Line 288: @@
   - NC
--------------------------------------------------------
+===== U6 =====
-**U6** 16-pin package outline (possibly intended to be a MAX3232 chip, but some pins are mixed up?)
+-pin package outline (possibly intended to be a MAX3232 chip, but some pins are mixed up?)
 Pin 1 bottom right if oriented with SW1 on top of board